Sealing Solutions by Industry

Pulp & Paper

Request a QuoteContact an Expert
We are recognized experts in sealing for the pulp and paper industry, and we will help you meet your reliability goals.

Industry Challenges

For over 40 years, we’ve developed tried and true products that have improved the reliability of pulp and paper mills. Every product is backed by proven installation, inspection, and troubleshooting procedures that are proven to prolong the life of your equipment. We are especially adept at handling large capital equipment such as digesters.

We offer sealing solutions and field inspections for pulp mill service, bleaching service, condensate, paperstock, evaporator and recovery boilers, high pressure liquor services, knife gate services, soot blowers, and CLO2 services.



Our Solutions

Compression Packing

ML4002 is engineered with finely ground particles of the highest quality graphite in a PTFE matrix to control graphite migration....

View Product
100% GFO Packing Certified by W.L. Gore
Style: ML4002
Multi-Lok braided high-purity carbon fibers made from a PAN base, with a minimum carbon content of 95.0%. (Staple fibers from PAN produce a...

View Product
Carbon Packing Braided Through with PTFE
Style: ML4461
SEPCO® FG4 fiberglass packing is constructed with a square braided from texturized filament, inorganic flexible glass fibers. This...

View Product
Fiberglass Braid - Untreated
Style: FG4
Multi-LokTM braided flexible graphite packing with no added lubricants or binders to cook out or become brittle.

View Product
Flexible Graphite Packing
Style: ML2001
Proprietary carbon fiber is braided to operate in extreme conditions. Because of its high thermal conductivity and lubricity, this packing...

View Product
High Performance Braided Carbon Packing
Style: ML560
The HydraSave Packing System includes Multi-LokTM braided carbon packing rings, high-purity graphite rings, and an optional...

View Product
HydraSave Packing System
Style: HDS
Finely ground particles of the highest quality graphite in a PTFE matrix to control graphite migration. It is effective in all equipment...

View Product
ML4002HC Graphite
Style: ML4002HC
ML2240 provides a softer and more flexible packing with shaft speeds up to 3,300 feet per minute (fpm). It performs well in color-sensitive...

View Product
SEPCO Exclusive High-Performance PTFE Packing
Style: ML2240
The special impregnation procedure fills all voids throughout the body of the packing with PTFE dispersion. A superior general purpose...

View Product
Spun Aramid Packing with PTFE Treatment
Style: ML6225
SS574 Multi-Lok packing is made of continuous filament polyimide and PTFE fibers that are impregnated with PTFE dispersion during the...

View Product
SS574 Packing
Style: SS574
The SuperCut from SEPCO® gives compression packing installers the ideal tool to cut braided rings with ease and precision. It cuts up to a...

View Product
SuperCut Packing Cutter
Style: SuperCut

Mechanical Seals

Designed for light to medium duty services in ANSI plans 7352 and 7353 for the chemical, food, pharmaceutical, pulp and paper, water and...

View Product
Convection Tanks
Style: A1C
The SEPCO® DTP is a multiple, cartridge-mounted mechanical seal. Rugged and dependable, the DTP is ideal for closed-loop convection...

View Product
Double Tandem Pumper
Style: DTP
The SEPCO ESD is a back to back multiple seal designed for application where positive lubrication is required from an external flush...

View Product
Externally Set Double Seal
Style: ESD
The SEPCO SAS is an engineered pneumatic sealing system designed to seal the shafts of equipment where typical contact seals such as...

View Product
SAS Air Seal
Style: SAS
With two shaft-supporting bushings and a lantern ring, the SAS-P is a noncontact tandem seal that uses air to seal and water to flush and...

View Product
SAS-P System for Centrifugal Pumps
Style: SAS-P
This high-performance, synthetic barrier fluid is the workhorse of seal lubricants. It meets most barrier and buffer fluid needs within...

View Product
SEPCO STL-5 Barrier Fluid
Style: STL5
The SEPCO SRC is a single internal cartridge mounted rotary seal designed for general service applications.

View Product
Single Rotary Cartridge Seal
Style: SRC
The SEPCO UMC is a stationary design multiple spring double seal used where leakage of hazardous or costly procucts cannot be tolerated and...

View Product
Unitized Multiple Cartridge Seal
Style: UMC
The SEPCO USC is a single internal cartridge mounted stationary seal with a restriction bushing for the use of a quench and drain for...

View Product
Unitized Single Cartridge Seal
Style: USC
The SEPCO® XR2 is easily assembled with only two halves. O-rings and gaskets are factory installed and do not require user attention....

View Product
XR2 Split Seal
Style: XR2

Gasketing Materials

Manufactured from 98% minimum pure graphite with a 0.002" thick 316 stainless steel insert that reduces gasket handling damage and...

View Product
Compressed Graphite Sheet with 316 Stainless Steel Insert
Style: 500
Compressed gasket sheet manufactured from synthetic fibers and a nitrile binder. Handles the highest temperature and chemical resistance of...

View Product
Compressed Sheet with Nitrile Binder
Style: 6234
A 100% pure PTFE joint sealant used in virtually any gasketing applications. Adhesive backing allows for easy installation and material is...

View Product
PTFE Joint Sealant
Style: Tetracord 5031

Bearing Protection

EXP is a true non-contact bearing isolator that utilizes a dual expeller to create centrifugal force and drive away contamination....

View Product
EXP
Style: EXP
EXP-FL includes all the benefits of a standard EXP with the adaptation for flange mounted applications where pressing the stator is not...

View Product
EXP-FL
Style: EXP-FL
EXP-GB is designed for applications where a positive seal is required because of flooded conditions. A positive seal is created within the...

View Product
EXP-GB
Style: EXP-GB
EXP-PB includes all the benefits of a standard EXP with an adaptation to mount within the existing LER/LOR ring grooves of split pillow...

View Product
EXP-PB
Style: EXP-PB

High Performance Plastics

Inspired by a special request from a valve manufacturer, SEPCO is pleased to announce that its P3 Plastics Division, based in Texas,...

View Product
Thermex Valve Components
Style: Thermex valve components
Looking for something else? Launch the Product Finder